Rebar marking type-3(Only circle)

 
  File name : BM3.LSP


    ¡ß Notice
       ¢¹ This program can recognize only donut, Circle, Line(tie bar). 
 
     Example 
Select objects: {p1}~{p2} 5 found       [Selet dots by using window box]
Select objects:                        [Finish selecting]
Pick marking point: {p3}                [Pick position of mark]
Enter Marking: bm3                     [Name of rebar, it is converted to uppercase]
Enter Rebar Dia: d29           [Diameter of rebar]