• About [DJDG]
• Install
  • Install [DJDG]
  • load [DJDG] menu
  • Try to draw Example
• General Drawing Works
  • Draw steel pile (section)
  • Draw steel pile (front view)
  • Draw front view of R.C.D pile
  • Draw rounded surfece
  • insert Section arrow
  • Insert Elevation mark and Write Elevation
  • Draw break line(thunder shape)
  • Draw slop lines that express inclined surface
  • Draw name of surface
  • Draw slop mark(%)
  • Insert ground surface mark
  • Insert water level mark
  • Draw slope ratio
  • Write text on circle or arc
  • Draw break line (Wave shape)
  • Cut the pipe and draw cutting mark
  • Cut and mark with wave shape
  • Draw leader
  • Draw leader that has several arrow head
  • Draw leader that has several arrow head(straight type)
  • Insert bearing type mark
  • Direction mark
  • Draw boring log
  • Insert Design Method(Allowable/Ultimate)
  • Draw Line by slop and slop mark
  • Start point or End point of Bridge
  • Insert water flow direction
  • Insert north mark
  • insert concrete mark
  • Draw position mark of boring
  • Insert embankment mark
  • Draw plan view of rounded embankment
  • Draw plan view of embankment
  • Draw section line of embankment
  • Draw Note Box
  • Draw stairs for abutment inspection (plan)
  • Draw lane mark
• Draw Structure
  • Draw section of PSC beam bridge
  • Draw pier side view using dialog box
  • Draw piles using dialog box
  • Draw section of abutment
  • Draw retaining wall section using Dialog box
  • Draw concrete barrier (h=1.080m)
  • Draw concrete barrier (h=1.350m)
  • Draw center barrier(h=890mm, half type)
  • Insert center barrier-1(h=890mm, Intergrated type)
  • Insert center barrier-2(h=1350mm, Intergrated type)
  • Draw concrete bracket
  • Draw base concrete
  • Draw approach slab (Concrete pavement type)
• Rebar Workds
  • Rebar mark type-1(Only circle)
  • Rebar mark type-2(Only circle)
  • vRebar mark type-3(Only circle)
  • Rebar mark type-4(Only circle)
  • Rebar mark type-5(Only circle)
  • Rebar mark type-6(Only circle)
  • Rebar mark type-1(with under line)
  • Rebar mark type-3(with under line)
  • Rebar mark type-4(with under line)
  • Rebar mark type-5(with under line)
  • Rebar mark type-6(with under line)
  • Change rebar mark type
  • Insert front,bank,upper,lower mark
  • Draw plan view of main rebar of circular column
  • Draw front view of main rebar of circular column
  • Stirrup rebar (tension & compression side)
  • Draw rounded rebar
  • Draw hook rebar
  • Make rebar table using data file
  • Make rebar table using rebar details
  • Draw rebar that resists splitting forces
  • Draw bearing block
  • Array linear between seclected two point
  • Array linear referencing inclined line
• Steel Structure Works
  • Draw splice plate using dialog box
  • trim between lines
  • trim between lines(make gap both side)
  • trim between lines(make gap one side)
  • Offset 2 side at once
  • Draw taper of steel plate thickness(1:5)
  • Draw welding symbol
  • Draw gusset plate
• Dimensions
  • Dimension Horizontal
  • Dimension Vertical
  • Dimension Aligned
  • Dimension Circle or Arc
  • Dimension Oblique
  • Up and Down dimension text
  • Edit text with Dialog box In succession
  • Change Scale of Dimensions
  • Convert to Oblique dimension adjusting exist line
  • Draw Dimension that sum existing dimensions
  • Radius MARK
  • Add skewed distance on existing dimension
• Modify
  • Do Measure on Arc
  • Divide a part of Arc
  • Do Measure on Line
  • Divide a part of Line
  • Change Text Height
  • Align texts to vertical line
  • Align texts to horizontal line
  • Edit selected texts in order
  • Exend line by distance
  • Change a part of line to hidden line
  • Rotate text referancing slop of line or circle
  • Offset several times
  • Array polar between seclected two point
  • Break a entity at a point
  • Change diameter of Circle at once
  • Change diameter of donut at once
  • Copy Text Content
  • View font code table for Civil engineering(djdg.shx)
  • Rotate referance
  • Plus number on number text
  • Delete all lines that is shorter then specified length
• Utils
  • Draw circle or box on existing text
  • Write numbers in sequence
  • Apply arithmetic to number text
  • Draw table using data file that made of "+", "-", "|"
  • Write coordinate
  • Make coordinate list of selected points
  • Write distance between two points
  • Write length of line
  • Plot selected borders
  • Plot all borders
  • Read coordinates data file and Draw line
  • Draw table
  • Draw section of excavation
  • Draw camber
  • Break all across points
  • Make border for auto plot
  • Plot borders automatically
  • Write current file name on drawing
  • Draw bending moment diagram
  • Do Wblock saving file name is selected text
  • Solid hatch
  • Put all solids back
  • Do Solid hatch double line text
  • make data file for G-Section
  • Draw Parabola
  • Copy Entities to Hatch layer
  • plot to eps file
• Other Functions
  • Find the point that is far from your point on the arc
  • Measure distance between two points on the arc
  • Change Color
  • Change line type
  • View font code table for Civil engineering(djdg.shx)
• [DJDG] for Excel
  • Install
  • Toolbars
    • Excel to CAD Table
    • CAD text to Excel
    • Excel data to CAD Pline
    • CAD Pline to Excel
    • SAP2000 element force to Excel
    • CAD sectin property to Excel
  • Functions for Civil Engineers
    • Vertical translation curve
    • Eqation to text
    • Required rebar area
    • Used rebar area
    • Concatenate cell to text
    • Equatin text to Value

chapter 2  General Drawing [General Work]

  
The general drawing work is done in the early stages of the project, so relatively 
modifications are frequent. Usually this is because general drawing work is closely related to planning.
Using CAD, [DJDG][General Work] provide tools to work faster 
There are many marks and functions used to draw structures.