Write distance between two points


  Program name : 2PD.LSP

  It's rare in drawing work, but sometimes in modeling work, 
  We sometimes need to write the distance between two points on the drawing.


 
 Example
Text height: 150                       [Enter height of text]
Text angle: 0                  [Enter angle of text]
Prefix: L=                             [Enter prefix of text]
Pick first point: {p1}          [Pick first point]
Pick second point: {p2}         [Pick second point]
Pick Text point : {p3}          [Pick insert point of text]
Pick first point:                      [You can do it continuously ]