Draw front view of R.C.D pile
 
  Program file name : RCD.LSP

  
   Example
  Pick start point: {p1}  [Pick start point of pile. Under line of footing]
  Pile diameter (mm): 1500 [Pile diameter (mm)]
  Pile length (m): 5 [Pile length (m)]
  Angle<1:?>: 5        [Angle of pile
                   If you enter number then draw pile angle of '1: Number'
                   "A" : Draw angle(degree) of pile  
                   "0" : Draw vertical pile]