Draw steel pile (front view)

 
  ÆÄÀϸí : SPILE2.LSP
 
 Example
 
Pick start point: {p1}      [Pick start point of pile. Under line of footing

Pile diameter (mm): 406.4 [Pile diameter (mm)

Pile length (m): 5        [Pile length (m)

Angle/<1:?>: 5 [Angle of pile
             If you enter number then draw pile angle of '1: Number'                                 
             "A" : Draw angle(degree) of pile
             "0" : Draw vertical pile]